Polymer Polyol XS-3630D
Description
XS-3630D polyol is a low-VOC polymer polyol composed of highly active polyether and styrene-acrylonitrile graft copolymer.
Typical Properties
| Appearance | White viscous liquid
Transparent Liquid |
| Hydroxyl number (mgKOH/g) | 25±3 |
| Water (%) | ≤0.05 |
| pH | 5 – 9 |
| Viscosity at 25℃ (mPa.s) | ≤4000 |
Applications
XS-3630D polyol is used to produce cold cure high resilient foams, which have better tear resistance and rebound resilience, comfortable handle as well.
Storage and Supply
XS-3630D polyol is slightly hygroscopic and may absorb moisture, which would affect the properties of the products. The polyol should be stored in sealed containers and in dry conditions, away from direct sources of heat. Polyol is supplied in drums and tank trucks; or confer with supplier.
Health and Safety Information
XS-3630D polyol has a very low odor of acute toxicity and does not present a significant health hazard to users. Normal standards of industrial hygiene should however be observed when handling this chemical. Suitable protective clothing and eye protection must be worn to avoid unnecessary contacts and accidental ingestion. In case of eye contact, seek medical attention.
Fire and Explosion
XS-3630D polyol will burn under certain condition and can explode if heated to decomposition temperature in a confined area. Polyols fires can be extinguished with water fog, carbon dioxide or dry chemicals.
|
|