Polyether Polyol XS-ED28
Description
XS-ED28 polyol is a kind of polyether polyol initiated with propylene glycol.
Typical Properties
| Appearance | Light yellow viscous liquid
Transparent Liquid |
| Colour APHA | ≤50 |
| Hydroxyl number (mgKOH/g) | 28±3 |
| Acid value (mgKOH/g) | ≤0.1 |
| Water (%) | ≤0.05 |
| ∑(K+Na+) (ppm) | ≤5 |
| Unsaturation (mol/Kg) | ≤0.1 |
| Viscosity at 25℃ (mPa.s) | 800±200 |
Applications
XS-ED28 polyol is used to produce coatings, adhesives, sealants and elastomers.
Storage and Supply
XS-ED28 polyol is slightly hygroscopic and may absorb moisture, which would affect the properties of the products. The polyol should be stored in sealed containers and in dry conditions, away from direct sources of heat. Polyol is supplied in drums and tank trucks; or confer with supplier.
Health and Safety Information
XS-ED28 polyol has a very low odor of acute toxicity and does not present a significant health hazard to users. Normal standards of industrial hygiene should however be observed when handling this chemical. Suitable protective clothing and eye protection must be worn to avoid unnecessary contacts and accidental ingestion. In case of eye contact, seek medical attention.
Fire and Explosion
|
|
XS-ED28 polyol will burn under certain condition and can explode if heated to decomposition temperature in a confined area. Polyols fires can be extinguished with water fog, carbon dioxide or dry chemicals.